6.3
IBM Global Network Dialer
Models:
ThinkPad 240, i Series 2621-
420,42U,421,441,460,46U,480,48U,540,541,560
Issue:
Cause:
Not supported
Resolution:
Windows Me comes with a software Dial-up Networking which can
be used for dial up connection instead of IBM Global Network Dialer.
1.
Click
Start
→
Settings
→
Dial Up Networking
2.
Dial Up Networking Wizard will guide you through rest of the
setup.
6.4
When transferring a file using the Infrared device at 4 Mbps from a computer
running Windows Me to computer running Windows 98, the file transfer fails
Models:
All ThinkPad models
Issue:
When transferring a file using the Infrared device at 4Mbps from a
computer running Windows Me to a computer running Windows 98,
the file transfer fails.
Cause:
This is Windows98 issue.
Resolution:
If using the Infrared device to transfer files between computers
running Windows 98, and Windows Me set the connection rate
between the communicating computers to 115 kbps:
1.
Click
Start
→
Settings
→
Control Panel
2.
Double-click
Network
icon
3.
Click
IBM ThinkPad Fast Infrared Port
4.
Click
“Properties”
5.
Click “Advanced” tab
6.
Click “Maximum Connect Rate” in the Property window
7.
Click “115,200bps” in the Value window
8.
Click [OK]
9.
Click [OK]
10.
Click [Yes] to reboot the system
6.5
Ring Central sometimes fails to receive the file after wake up from RI.
Models:
ThinkPad
i S
eries 1400 2611-410/450/411/451
Issue:
Ring Central sometimes fails to receive a file after resuming from
Standby from an incoming call. The system can wake up but Ring
Central does not change Receiving mode.
Cause:
Ring Central is not completely compatible with Windows Me.
Resolution:
Do not use RingCental with WOR function under Windows Me.
7
Upgrade and installation Issues
7.1
Touching Trackpoint causes a hang during clean install
Models:
ThinkPad 240
Issue:
During clean install, Setup will hang when excessive movement is
