Lenovo ThinkPad S5 2nd Generation Hardware Maintenance Manual Download Page 106

Page: 106 / 110

Electronic emission notices

For electronic emission information on Class B digital devices, refer to the corresponding information in the

User Guide

EU contact: Lenovo, Einsteinova 21, 851 01 Bratislava, Slovakia

Trademarks

The following terms are trademarks of Lenovo in the United States, other countries or both:

Lenovo
Lenovo logo
ThinkPad
ThinkPad logo
TrackPoint

Cortana, Microsoft, Windows, and Windows Server are trademarks of the Microsoft group of companies.

Intel is a trademark or registered trademarks of Intel Corporation or its subsidiaries in the United States and
other countries.

The terms HDMI and HDMI High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.

Other company, product, or service names may be the trademarks or service marks of others.

100

Hardware Maintenance Manual

Summary of Contents for ThinkPad S5 2nd Generation















































































































Search results

Summary of Contents for ThinkPad S5 2nd Generation

Reviews:

Related manuals for ThinkPad S5 2nd Generation

Brands by name

Popular brands

Lenovo ThinkPad S5 2nd Generation, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkPad S5 2nd Generation

Reviews:

Related manuals for ThinkPad S5 2nd Generation

Brands by name

Popular brands