•
Show only on 1
: Display the video output only on your computer screen.
•
Show only on 2
: Display the video output only on an external display.
If you show programs using DirectDraw or Direct3D
®
in full-screen mode, only the main display shows the
video output.
Change display settings
1. Right-click a blank area on the desktop and select
Display settings
.
2. Select the display that you want to configure.
3. Change display settings of your preference.
You can change the settings for both the computer display and the external display. For example, you can
define which one is the main display and which one is the secondary display. You also can change the
resolution and orientation.
Note:
If you set a higher resolution for the computer display than the external display, only part of the screen
can be displayed on the external display.
Get to know YOGA modes (for L13 Yoga Gen 2 and S2 Yoga Gen 6 only)
Your computer display can be rotated to any angle up to 360 degrees.
Attention:
Do not rotate the computer display with too much force, or apply too much force to the upper-
right or upper-left corner of the computer display. Otherwise the computer display or hinges might get
damaged.
Your computer features the following four YOGA modes. You can switch among different modes according
to your preference.
Note:
The keyboard and the pointing devices are automatically disabled in the stand mode, tent mode, and
tablet mode. Use the touch screen to control your computer instead.
Chapter 2
.
Get started with your computer
17
Summary of Contents for ThinkPad L13 Gen 2
Page 1: ...L13 Gen 2 L13 Yoga Gen 2 S2 Gen 6 and S2 Yoga Gen 6 User Guide ...
Page 6: ...iv L13 Gen 2 L13 Yoga Gen 2 S2 Gen 6 and S2 Yoga Gen 6 User Guide ...
Page 14: ...8 L13 Gen 2 L13 Yoga Gen 2 S2 Gen 6 and S2 Yoga Gen 6 User Guide ...
Page 26: ...20 L13 Gen 2 L13 Yoga Gen 2 S2 Gen 6 and S2 Yoga Gen 6 User Guide ...
