Lenovo ThinkPad 770E-ED Reference Download Page 53

Page: 53 / 201

Replacing the Battery Pack

Insert the new battery pack until it snaps into place.

Make sure you align the slanted edge of the battery pack with
the slant on the battery bay.

Push in the bay eject lever until it is flush.

You have finished replacing the battery pack.

You can replace the battery when the computer is in

hibernation mode or when it is powered off. If you are using
a PC Card, the computer might not be able to enter
hibernation mode. If this happens, power off the computer.

To switch from the main battery to the secondary battery

“Installing the Secondary Battery Pack” on page 95.

Chapter 1. Getting Familiar with Your Computer

Summary of Contents for ThinkPad 770E-ED










































































































































































































Search results

Summary of Contents for ThinkPad 770E-ED

Reviews:

Related manuals for ThinkPad 770E-ED

Brands by name

Popular brands

Lenovo ThinkPad 770E-ED, Reference

Search results

Summary of Contents for ThinkPad 770E-ED

Reviews:

Related manuals for ThinkPad 770E-ED

Brands by name

Popular brands