Functions of Your Computer
4
Select the first device you want for the startup sequence;
then click on it.
The device moves up to box 1. You cannot set a hard disk
drive before a PC Card.
If you are using a
remote program loading (RPL)
system through a token-ring card or some other network
card, do the following:
a
Select Network in either the Power-On or the
Network submenu, and click on it. The “Speed”
menu appears.
b
If you are using a token-ring card, select the
speed you want (4 or 16), and click on it; then
press Enter.
If you are using a network card other than a
token-ring card, such as an Ethernet card, you need
not specify the RPL speed. Press Esc to exit this
menu.
5
Repeat these steps for the other devices. You can set
up to four devices.
6
Click on OK or press Enter to save the changes.
Pressing the Test button displays the “Test” submenu. It is used to
run diagnostic tests on your computer to check for hardware errors.
For more information
“Testing Your Computer” on page 133.
Pressing the Restart button ends the Easy-Setup program and
restarts the computer.
26
IBM ThinkPad 380Z User's Reference
Title: C79EPMST CreationDate: 06/22/98 12:00:09
