manualshive.com logo in svg

Lenovo ThinkCentre M920s, User Manual And Hardware Maintenance Manual, Page: 63 / 80

Share
Download
Lenovo ThinkCentre M920s User Manual And Hardware Maintenance Manual Download Page 63

1.  Remove any media from the drives and turn off all connected devices and the computer. Disconnect all 

power cords from electrical outlets and disconnect all cables from the computer.

2.  Remove the computer cover. See “Removing the computer cover” on page 17.

3.  Remove the front bezel. See “Replacing the front bezel” on page 18.

4.  Pivot the drive bay assembly upward. See “Pivoting the drive bay assembly upward and downward” on 

page 19.

5.  Disconnect the heat sink and fan assembly cable from the system board.

6.  Replace the heat sink and fan assembly.

Figure 98. Removing the heat sink and fan assembly

Figure 99. Installing the heat sink and fan assembly

7.  Connect the new heat sink and fan assembly cable to the system board.

8.  Reinstall the removed parts. To complete the replacement, see “Completing the parts replacement” on 

page 68.

Replacing the power supply assembly

Attention:

Do not open your computer or attempt any repairs before reading the 

Important Product 

Information Guide

.

Chapter 4

.

Replacing hardware

59

Summary of Contents for ThinkCentre M920s

















































































Reviews:

No comments