Lenovo ThinkCentre M920s Page 69 User Manual And Hardware Maintenance Manual Download

Page: 69 / 80

Figure 110. Removing the cover presence switch

Figure 111. Installing the cover presence switch

7. Connect the new cover presence switch cable to the system board.

8. Reinstall the removed parts. To complete the replacement, see “Completing the parts replacement” on

page 68.

Replacing the rear fan

Attention:

Do not open your computer or attempt any repairs before reading the

Important Product

Information Guide

1. Remove any media from the drives and turn off all connected devices and the computer. Disconnect all

power cords from electrical outlets and disconnect all cables from the computer.

2. Remove the computer cover. See “Removing the computer cover” on page 17.

3. Remove the front bezel. See “Replacing the front bezel” on page 18.

Chapter 4

Replacing hardware

Summary of Contents for ThinkCentre M920s

















































































Search results

Summary of Contents for ThinkCentre M920s

Reviews:

Related manuals for ThinkCentre M920s

Brands by name

Popular brands

Lenovo ThinkCentre M920s, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for ThinkCentre M920s

Reviews:

Related manuals for ThinkCentre M920s

Brands by name

Popular brands