Lenovo ThinkCentre M920s Page 50 User Manual And Hardware Maintenance Manual Download

Page: 50 / 80

Replacing a PCI Express card

Attention:

Do not open your computer or attempt any repairs before reading the

Important Product

Information Guide

1. Remove any media from the drives and turn off all connected devices and the computer. Disconnect all

power cords from electrical outlets and disconnect all cables from the computer.

2. Remove the computer cover. See “Removing the computer cover” on page 17.

3. Remove the front bezel. See “Replacing the front bezel” on page 18.

4. Pivot the drive bay assembly upward. See “Pivoting the drive bay assembly upward and downward” on

page 19.

5. Replace a PCI Express card.

Figure 68. Removing a PCI Express card

Note:

If the card is held in place by a retaining latch, press the latch

as shown to disengage the latch.

Then, gently remove the card from the slot.

M920t User Guide and Hardware Maintenance Manual

Summary of Contents for ThinkCentre M920s

















































































Search results

Summary of Contents for ThinkCentre M920s

Reviews:

Related manuals for ThinkCentre M920s

Brands by name

Popular brands

Lenovo ThinkCentre M920s, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for ThinkCentre M920s

Reviews:

Related manuals for ThinkCentre M920s

Brands by name

Popular brands