manualshive.com logo in svg

Lenovo ThinkCentre M828z, User Manual And Hardware Maintenance Manual

Share
Download
Lenovo ThinkCentre M828z User Manual And Hardware Maintenance Manual Download Page 42

Figure 54. Installing the Wi-Fi card

Figure 55. Connecting the Wi-Fi antenna cables

Figure 56. Installing the Wi-Fi card shield

6.  Reinstall the removed parts. To complete the replacement, see “Completing the parts replacement” on 

page 57.

Replacing the serial connector module

Attention:

Do not open your computer or attempt any repairs before reading the 

Important Product 

Information Guide

.

1.  Remove the computer stand. See “Replacing the computer stand” on page 16.

2.  Remove the computer cover. See “Removing the computer cover” on page 17.

3.  Remove the side I/O bezel. See “Replacing the side I/O bezel” on page 23.

4.  Remove the system board shield. See “Replacing the system board shield” on page 24.

5.  Replace the serial connector module.

38

M828z User Guide and Hardware Maintenance Manual

Summary of Contents for ThinkCentre M828z





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands