manualshive.com logo in svg

Lenovo ThinkCentre M828z, User Manual And Hardware Maintenance Manual

Share
Download
Lenovo ThinkCentre M828z User Manual And Hardware Maintenance Manual Download Page 27

Replacing the optical drive and storage drive cables

Attention:

Do not open your computer or attempt any repairs before reading the 

Important Product 

Information Guide

.

1.  Remove the computer stand. See “Replacing the computer stand” on page 16.

2.  Remove the computer cover. See “Removing the computer cover” on page 17.

3.  Remove the optical drive. See “Replacing the optical drive” on page 20.

4.  Disconnect the optical drive and storage drive cables from the storage drive and the system board.

5.  Replace the optical drive and storage drive cables.

Figure 25. Removing the optical drive and storage drive cables

Figure 26. Installing the optical drive and storage drive cables

6.  Connect the new optical drive and storage drive cables to the storage drive and the system board.

7.  Reinstall the removed parts. To complete the replacement, see “Completing the parts replacement” on 

page 57.

Replacing the side I/O bezel

Attention:

Do not open your computer or attempt any repairs before reading the 

Important Product 

Information Guide

.

1.  Remove the computer stand. See “Replacing the computer stand” on page 16.

Chapter 4

.

Replacing hardware

23

Summary of Contents for ThinkCentre M828z





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands