manualshive.com logo in svg

Lenovo ThinkCentre M828z, User Manual And Hardware Maintenance Manual

Share
Download
Lenovo ThinkCentre M828z User Manual And Hardware Maintenance Manual Download Page 34

Figure 39. Installing the cover presence switch into the bracket

Figure 40. Installing the cover presence switch and the bracket

9.  Connect the new cover presence switch cable to the system board.

10.  Reinstall the removed parts. To complete the replacement, see “Completing the parts replacement” on 

page 57.

Replacing the system fan

Attention:

Do not open your computer or attempt any repairs before reading the 

Important Product 

Information Guide

.

1.  Remove the computer stand. See “Replacing the computer stand” on page 16.

2.  Remove the computer cover. See “Removing the computer cover” on page 17.

3.  Remove the side I/O bezel. See “Replacing the side I/O bezel” on page 23.

4.  Remove the system board shield. See “Replacing the system board shield” on page 24.

5.  Remove the VESA mount bracket. See “Replacing the VESA mount bracket” on page 25.

6.  Disconnect the system fan cable from the system board.

7.  Replace the system fan.

30

M828z User Guide and Hardware Maintenance Manual

Summary of Contents for ThinkCentre M828z





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands