Lenovo ThinkCentre M76, Hardware Maintenance Manual, Page: 128 / 214

• If you are installing a memory module, open the retaining clips of the memory slot into which you
want to install the memory module.
Figure 56. Opening the retaining clips
10. Position the new memory module over the memory slot. Make sure that the notch 1 on the memory
module aligns correctly with the slot key 2 on the system board. Push the memory module straight
down into the slot until the retaining clips close.
Figure 57. Installing a memory module
11. To complete the installation or replacement, go to “Completing the parts replacement” on page 157.
Installing or replacing a PCI card
Attention:
Do not open your computer or attempt any repair before reading and understanding the “Important safety information”
in the
ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre
Safety and Warranty Guide , go to:
http://www.lenovo.com/support
This section provides instructions on how to install or replace a PCI card. Your computer has two standard
PCI card slots, one PCI Express x1 card slot, and one PCI Express x16 graphics card slot.
To install or replace a PCI card, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
124
ThinkCentre Hardware Maintenance Manual