Diagnostic Error Code
FRU/Action
030-196-XXX
SCSI interface test halt, error threshold
exceeded
1. Press F3 to review the log file.
2. Restart the test to reset the log file.
030-197-XXX
SCSI interface test warning
1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 57.
2. Re-run test.
3. Replace the component that is called out in warning
statement.
4. Replace the component under test.
030-198-XXX
SCSI interface test aborted
1. If a component is called out, make sure it is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 57.
2. Flash the system and re-test. See “Flash update
procedures” on page 311.
3. Go to “Undetermined problems” on page 82.
030-199-XXX
SCSI interface test failed, cause unknown
1. Go to “Undetermined problems” on page 82.
2. Flash the system and re-test. See “Flash update
procedures” on page 311.
3. Replace component under function test.
035-000-XXX
RAID interface Test Passed
No action
035-0XX-XXX
RAID interface Failure
1. RAID signal cable
2. RAID device
3. RAID adapter card, if installed
4. System board
035-195-XXX
RAID interface Test aborted by user
Information only Restart the test, if necessary.
035-196-XXX
RAID interface test halt, error threshold
exceeded
1. Press F3 to review the log file.
2. Restart the test to reset the log file.
035-197-XXX
RAID interface test warning
1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 57.
2. Re-run test.
3. Replace the component that is called out in warning
statement.
4. Replace the component under test.
035-198-XXX
RAID interface test aborted
1. If a component is called out, make sure it is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 57.
2. Flash the system and re-test. See “Flash update
procedures” on page 311.
3. Go to “Undetermined problems” on page 82.
035-199-XXX
RAID interface test failed, cause unknown
1. See “Undetermined problems” on page 82.
2. Flash the system and re-test. See “Flash update
procedures” on page 311.
3. Replace component under function test.
071-000-XXX
Audio port Interface Test Passed
No action
Chapter 7
.
Symptom-to-FRU Index
73
Summary of Contents for ThinkCentre M71z
