Lenovo ThinkCentre M53 Hardware Maintenance Manual Download Page 143

Page: 143 / 184

2. Remove the computer cover. See “Removing the computer cover” on page 123.

3. Disconnect the signal cable and the power cable from the hard disk drive assembly.

4. Remove the two screws that secure the hard disk drive assembly. Slide the hard disk drive assembly as

shown, and then lift the hard disk drive assembly to remove it from the computer.

Figure 51. Removing the hard disk drive assembly

5. Position the new hard disk drive assembly on the system board so that the two holes in the hard

disk drive assembly are aligned with the standoffs on the system board. Slide the hard disk drive
assembly as shown until the two screw holes

are aligned with the corresponding mounting studs

on the system board.

Figure 52. Installing the hard disk drive assembly

Chapter 11

Installing or replacing hardware

135

Summary of Contents for ThinkCentre M53
























































































































































































Search results

Summary of Contents for ThinkCentre M53

Reviews:

Related manuals for ThinkCentre M53

Brands by name

Popular brands

Lenovo ThinkCentre M53, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkCentre M53

Reviews:

Related manuals for ThinkCentre M53

Brands by name

Popular brands