Lenovo ThinkCentre Edge 71z Hardware Maintenance Manual Download Page 96

Page: 96 / 182

6. To reinstall the system stand hinge cover, place the system stand hinge cover on the computer so that

the two plastic tabs on the hinge cover align with the corresponding holes in the computer.

Figure 6. Reinstalling the system stand hinge cover

7. Reinstall the screw to secure the system stand hinge cover to the computer.

Figure 7. Reinstalling the screw to secure the system stand hinge cover to the computer

Removing and reinstalling the system stand

Attention

Do not open your computer or attempt any repair before reading and understanding the “Important safety
information” in the

ThinkCentre Edge Safety and Warranty Guide

that came with your computer. To obtain a

copy of the

ThinkCentre Edge Safety and Warranty Guide

, go to:

http://www.lenovo.com/support

ThinkCentre Edge Hardware Maintenance Manual

Summary of Contents for ThinkCentre Edge 71z























































































































































































Search results

Summary of Contents for ThinkCentre Edge 71z

Reviews:

Related manuals for ThinkCentre Edge 71z

Brands by name

Popular brands

Lenovo ThinkCentre Edge 71z, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkCentre Edge 71z

Reviews:

Related manuals for ThinkCentre Edge 71z

Brands by name

Popular brands