Lenovo ThinkCentre Edge 71z Hardware Maintenance Manual Download Page 46

Page: 46 / 182

Black screen instead of DVD video

Symptom: Black screen instead of DVD video

Actions:

• Restart the DVD player program.

• Close any open files, turn off the computer, and then restart the computer.

• Try a lower screen resolution or color depth.

If these actions do not correct the problem, run the diagnostic programs (see “Diagnostics” on page 51 for
instructions). If you need technical assistance, see “Additional information resources” on page 30.

DVD movie will not play

Symptom: DVD movie will not play.

Actions:

• Make sure that the disc surface is clean and not scratched.

• Check the disc or package for regional coding. You might need to purchase a disc with coding for

the region where you are using your computer.

No audio or intermittent audio while playing DVD movie

Symptom: No audio or intermittent audio while playing DVD movie.

Actions:

• Check the volume control settings on your computer and on your speakers.

• Make sure that the disc surface is clean and not scratched.

• Check all cable connections to and from the speakers.

• Use the DVD menu for the video to select a different audio track.

Playback is very slow or choppy

Symptom: Playback is very slow or choppy.

Actions:

• Disable any background programs, such as AntiVirus or Desktop Themes.

• Ensure that video resolution is set to less than 1152 x 864.

Invalid disc or no disc found message

Symptom: Invalid disc or no disc found message

Actions:

ThinkCentre Edge Hardware Maintenance Manual

Summary of Contents for ThinkCentre Edge 71z























































































































































































Search results

Summary of Contents for ThinkCentre Edge 71z

Reviews:

Related manuals for ThinkCentre Edge 71z

Brands by name

Popular brands

Lenovo ThinkCentre Edge 71z, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkCentre Edge 71z

Reviews:

Related manuals for ThinkCentre Edge 71z

Brands by name

Popular brands