Lenovo ThinkCentre 4167, User Manual, Page: 56 / 144

• To complete the installation or replacement, go to “Completing the parts replacement” on page 67.
Replacing the hard disk drive
Attention:
Do not open your computer or attempt any repair before reading and understanding the “Important safety information”
on page v.
This section provides instructions on how to replace the hard disk drive.
Note: Depending on your model type, your computer might come with a 2.5-inch solid state drive. To install
the solid state drive, see “Installing the solid state drive” on page 42.
To replace the hard disk drive, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Open the computer cover. See “Opening the computer cover” on page 30.
3. Locate the hard disk drive. See “Locating components” on page 11.
4. Pull on the handle of the hard disk drive bracket as shown and then lift the hard disk drive bracket
up from the optical drive bay.
Figure 26. Removing the hard disk drive
5. Disconnect the signal cable and the power cable from the hard disk drive to completely remove the hard
disk drive from the chassis.
44
ThinkCentre User Guide