manualshive.com logo in svg

Lenovo ThinkCentre 4167, User Manual, Page: 17 / 144

Share
Download
Lenovo ThinkCentre 4167 User Manual Download Page 17

Software overview

The computer comes with a preinstalled operating system and several software programs provided by
Lenovo.

Software provided by Lenovo

The following software programs are provided by Lenovo to help you improve productivity and reduce the
cost associated with maintaining your computer. Software programs provided with your computer might
vary depending on your computer model type and preinstalled operating system.

Lenovo ThinkVantage Tools

The Lenovo ThinkVantage

®

Tools program guides you to a host of information sources and provides easy

access to various tools to help you work more easily and securely.

Note:

The Lenovo ThinkVantage Tools program is only available on computers with the Windows 7 operating

system from Lenovo.

To access the Lenovo ThinkVantage Tools program, click

Start

➙

All Programs

➙

Lenovo ThinkVantage

Tools

.

The following table lists the programs that you can access from the Lenovo ThinkVantage Tools program. To
access a program, double-click the corresponding icon.

Table 1. Program icon names in Lenovo ThinkVantage Tools

Program name

Icon name in Lenovo ThinkVantage Tools

Create Recovery Media

Factory Recovery Disks

Fingerprint Software

Fingerprint Reader

Lenovo Solution Center or Lenovo ThinkVantage Toolbox

System Health and Diagnostics

ThinkVantage Password Manager

Password Vault

ThinkVantage Power Manager

Power Controls

ThinkVantage Rescue and Recovery

®

Enhanced Backup and Restore

ThinkVantage System Update

Update and Drives

ThinkVantage Productivity Center

The ThinkVantage Productivity Center program guides you to a host of information and tools to help you set
up, understand, maintain, and enhance your computer.

Note:

The ThinkVantage Productivity Center program is only available on computers preinstalled with

the Windows Vista operating system from Lenovo.

For more information, see “ThinkVantage Productivity Center” on page 111.

Lenovo Welcome

The Lenovo Welcome program introduces you to some innovative built-in features of Lenovo and guides you
through a few important setup tasks to help you make the most of your computer.

Fingerprint Software

The integrated fingerprint reader provided on some keyboards enables you to enroll your fingerprint and
associate it with your power-on password, hard disk drive password, and Windows password. As a result,

Chapter 1

.

Product overview

5

Summary of Contents for ThinkCentre 4167

















































































































































Reviews:

No comments