Lenovo ThinkCentre 4167, User Manual, Page: 55 / 144

1. Install the solid state drive into the storage converter. Then, install the 4 screws to secure the solid
state drive to the storage converter.
Figure 24. Installing the solid state drive into the storage converter
2. To install the solid state drive with the storage converter into the 3.5-inch hard disk drive bracket, flex
the bracket and align pin 1 , pin 2 , pin 3 , and pin 4 on the bracket with the corresponding holes in
the storage converter.
Figure 25. Installing the solid state drive with the storage converter into the hard disk drive bracket
3. Connect the signal cable and the power cable to the solid state drive.
4. Install the solid state drive into the hard disk drive bay. See “Replacing the hard disk drive” on page 44.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
Chapter 5
.
Installing or replacing hardware
43