manualshive.com logo in svg

Lenovo THINK STATION 4262, User Manual, Page: 60 / 86

Share
Download
Lenovo THINK STATION 4262 User Manual Download Page 60

Creating RAID volumes

This section describes how to use the Intel Matrix Storage Manager option ROM configuration utility to
create RAID volumes.

1. Press Ctrl+I when prompted to enter the Intel Matrix Storage Manager option ROM configuration utility.

2. Use the up and down arrow keys to select

Create RAID Volume

and press Enter.

3. Type a proper RAID Volume name in the

Name

field and press Tab.

4. Use the arrow keys to select a RAID level in the

RAID Level

field and press Tab.

5. If appropriate, use the arrow keys to select a Stripe Size in the

Stripe Size

field and press Tab.

6. Type a volume size in the

Capacity

field and press Tab.

7. Press Enter to initiate volume creation.

8. When prompted, press Y to accept the warning message and create the volume.

9. Return to step 2 to create additional RAID volumes, or select

Exit

and press Enter.

10. Press Y when prompted to confirm the exit.

Deleting RAID volumes

This section describes how to use the Intel Matrix Storage Manager option ROM configuration utility to
delete RAID volumes.

1. Press Ctrl+I when prompted to enter the Intel Matrix Storage Manager option ROM configuration utility.

2. Use the up and down arrow keys to select

Delete RAID Volume

and press Enter.

3. Use the arrow keys to select the RAID volume to be deleted and press Delete.

4. When prompted, press Y to confirm the deletion of the selected RAID volume. Deleting a RAID volume

will reset the hard disk drives to non-RAID.

5. After deleting a RAID volume, you can:

• Return to step 2 to delete additional RAID volumes.

• See “Creating RAID volumes” on page 54 for RAID volume creation.

• Use the up and down arrow keys to select

Exit

and press Enter.

• Use the up and down arrow keys to select

Reset Disks to Non-RAID

and press Enter.

a. Use the arrow keys and the space key to mark individual physical hard disk drives to be reset, and

then press Enter to complete the selection.

b. When prompted, press Y to confirm the reset action.

c. After completing the Reset Disks to Non-RAID function, you can:

– Return to step 2 to delete additional RAID volumes.

– See “Creating RAID volumes” on page 54 for RAID volume creation.

– Use the up and down arrow keys to select

Exit

and press Enter.

Configuring RAID for machine types 4266, 4269, 4271, and 4272

This section contains information about the required number of SATA or SAS hard disk drives for the
supported level of RAID and SATA or SAS RAID configuration for machine types 4266, 4269, 4271, and 4272.

Note:

You can install a combination of SATA and SAS hard disk drives within the same computer. However,

SATA and SAS hard disk drives cannot be installed within the same RAID array.

54

ThinkStation User Guide

Summary of Contents for THINK STATION 4262























































































Reviews:

No comments