Lenovo RackSwitch G8264, Installation Manual

Page: 46 / 106

46
G8264 Installation Guide
5. Secure the switch to the front rack posts with M6 screws (Item 3), washers (Item 5), and clip nuts (Item
4). Torque the screws to approximately 5.7 Nm +/ ‐ 0.1 Nm (50 inch ‐ pounds).
6. Attach the rear alignment plate (Item 7) to the rear rack posts with M6 screws (Item 3), washers (Item
5), and clip nuts (Item 4). Torque the screws to approximately 5.7 Nm +/ ‐ 0.1 Nm (50 inch ‐ pounds).
7.
If installing the 1U air ‐ duct option, see the instruction on page 47 .
8. Connect all external cables in accordance with the “Cabling Guidelines” on page 36 .
9.
Initialize the switch. See Chapter 5, “Initializing the G8264 ,” on page 75 .
10. If the switch is a replacement unit, set Vital Product Data (see “Configuring Vital Product Data” on
page 72 ).
5
3
4
7
3
5
4