Lenovo RackSwitch G8264, Installation Manual

Page: 33 / 106

© Copyright Lenovo 2017 Chapter 3: Installing G8264 Hardware and Options
33
For convenience, once the G8264 is installed and initialized, you can use the
show sys ­ info
command in the switch firmware interface to display the product
serial number and other required information. For more information, see
“Configuring Vital Product Data” on page 72 .
Required Tools
You need the following tools or equipment to install the G8264:
 Standard flat ‐ blade screwdriver
 #2 Phillips screwdriver
 Electrostatic discharge wrist strap
Package Contents
The basic G8264 package contains the following items:
 One RackSwitch G8264 unit with front ‐ to ‐ rear or rear ‐ to ‐ front airflow
 One two ‐ post mounting kit for standard 19” equipment racks:

Two mounting brackets

Screws to attach brackets to the switch unit

Screws to attach the switch unit to the equipment rack
 One console cable kit that includes:

One Mini ‐ USB to RJ ‐ 45 serial cable

One Category 5 patch cable

One DB9 to RJ ‐ 45 adapter
 Two AC power cords
 One Documentation CD, which includes the Systems Information document
 One Environmental Notices CD
 One Important Notices document
 One Warranty Information document
For a list of compatible switch components and options (such as rack ‐ mounting kits,
modules, cords, and cables), see the Lenovo Networking Catalog .
Environmental Requirements
This section describes the basic environmental requirements for the G8264. Make
sure the location where you install the switch meets the following requirements:

Install the switch unit in a dry, clean, well ‐ ventilated area.

Provide adequate space in the front and back of the switch unit, to ensure proper
air flow.

Make sure that an adequate grounded power supply is within reach of the
switch unit.
 Make sure that twisted ‐ pair cable is routed away from power lines, fluorescent
lighting fixtures and other sources of electrical interference.