Lenovo RackSwitch G8052 Installation Manual Download Page 41

Page: 41 / 86

Chapter 3: Installing G8052 Hardware and Options

Installing the G8052 in a Lenovo iDataPlex Rack

This section describes how to install the G8052 in a Lenovo iDataPlex rack. The

iDataPlex mounting kit allows the switch to be mounted either horizontally or

vertically.

The kit must be purchased separately. It includes the following parts:

Attention:

The rack-mounting frame may not be able to support the weight of the

networking switch with only the front post mounting brackets (2-post application). If
the switch has an undesirable amount of sag, it is recommended to use a 4-post
mounting kit.

Attention:

For earthquake stability, mount the switch in a 4-post rack.

Statement 26

CAUTION:
Do not place any object on top of rack-mounted devices.

Table 12. Lenovo Adjustable 19” 4-Post Rail Kit parts

Item number

Description

Quantity

RID label

M6 locking washers

M6 screws

M6 clip nuts

M4 screws

Switch front brackets

Switch rear brackets

Rear mounting brackets

Summary of Contents for RackSwitch G8052























































































Search results

Summary of Contents for RackSwitch G8052

Reviews:

Related manuals for RackSwitch G8052

Brands by name

Popular brands

Lenovo RackSwitch G8052, Installation Manual

Search results

Summary of Contents for RackSwitch G8052

Reviews:

Related manuals for RackSwitch G8052

Brands by name

Popular brands