Lenovo RackSwitch G7000, Installation Manual

Page: 9 / 42

Chapter 1. Introduction
The Lenovo RackSwitch G7000 Redundant Power Supply (RPS) is a 1U redundant power supply. Up to four
RackSwitches can be connected to a single dedicated power source.
Note: The power supply comes with an attached power cord.
For a list of replaceable components pertaining to the redundant power supply, such as rack-mounting kits
and power cords, see the Lenovo Networking Catalog.
The Lenovo Documentation CD
The Lenovo Documentation CD includes the product Safety Information document, the License Agreement
for Machine Code (LAMC) document, and the Environmental Notices and User Guide document.
To access these documents:
• If you are using a Windows operating system, insert the CD into the CD or DVD drive and from My
Computer, double click the CD or DVD drive and select the installation guide that supports your product.
• If you are using a Linux operating system, insert the CD into the CD or DVD drive and run the following
command from the mnt/cd directory, sh.linux.sh . Double click on the Installation Guides directory and
select the installation guide that supports your product.
Hardware and software requirements
The Lenovo Documentation CD requires the following minimum hardware and software:
• Microsoft Windows XP, Windows 2000, or Red Hat Linux
• 100 MHz microprocessor
• 32 MB of RAM
• Adobe Acrobat Reader 3.0 (or later) or xpdf, which comes with Linux operating systems
Notices and statements in this document
The caution and danger statements in this document are also in the multilingual Safety Information
document, which is on the Lenovo Documentation CD. Each statement is numbered for reference to the
corresponding statement in your language in the Safety Information document.
The following notices and statements are used in this document:
• Note: These notices provide important tips, guidance, or advice.
• Important: These notices provide information or advice that might help you avoid inconvenient or
problem situations.
• Attention: These notices indicate potential damage to programs, devices, or data. An attention notice is
placed just before the instruction or situation in which damage might occur.
• Caution: These statements indicate situations that can be potentially hazardous to you. A caution
statement is placed just before the description of a potentially hazardous procedure step or situation.
• Danger: These statements indicate situations that can be potentially lethal or extremely hazardous to you.
A danger statement is placed just before the description of a potentially lethal or extremely hazardous
procedure step or situation.
© Copyright Lenovo 2015, 2017
1