Lenovo LENOVOEMC PX6-300D User Manual Download | Manualshive

Page: 16 / 178

background image

Connecting the px6-300d

Initial Setup

If you have purchased more than one px6-300d, complete all steps on one device before setting up
additional devices.

1. Use the included network cable to connect the px6-300d to your network router, switch or directly

to a computer.

2. Connect the included power adapter to the back of the px6-300d and a power socket or

Uninterruptible Power Supply (UPS).

3. Your px6-300d should power on automatically.

4. From a computer on your network, open a web browser and go to http://setup.lenovoemc.com to

set up your px6-300d on your network. For best results, use a computer that is connected to the
same subnet or network segment as the px6-300d.

You can access the px6-300d Management Console directly by entering the IP address or model
name of your px6-300d in your computer’s web browser. To use the model name on a Mac, add
.local after the name in the browser (for example, px6-300d.local).

5. OPTIONAL: if desired, install the LenovoEMC Storage Manager and Media Aggregation software.

If you install LenovoEMC Storage Manager, its icon will appear in the System Tray (Windows) or
Menu Bar (Mac). The LenovoEMC Storage Manager will automatically scan your network and
connect to available Shares.

If you receive a message from your operating system's firewall alerting you of network activity, be
sure to unblock communications.

Mac Users: Shares on the px6-300d will mount and appear on the Mac Desktop.

PC Users: Shares on the px6-300d will automatically be assigned a drive letter and will be
available in the Network Drives section under My Computer.

Network Settings

The Network page of your px6-300d is where you make changes to set up network connectivity. The
Network page displays your current network settings and enables those settings to be modified. On this
page, you can identify your DNS servers and WINS servers and how your system's IP address is
determined. Most system IP addresses and other network settings can normally be configured
automatically.

Manually Configuring Your Network

If you are comfortable with network technology and want to configure the network, refer to

Manually

Configuring Network Settings

.

Bonded NICs

If your px6-300d has multiple network interface cards (NICs), you can bond those NICs. Refer to

Bonding

NICs

.

Setting up Your px6-300d Network Storage

6

Connecting
the px6-300d

«
...
14
15
16
17
18
...
»

Summary of Contents for LENOVOEMC PX6-300D



















































































































































































Reviews:

No comments

Related manuals for LENOVOEMC PX6-300D

AllShare Cast Dongle

Brand: Samsung Pages: 2

Brand: D-Link Pages: 14

Brand: D-Link Pages: 7

Brand: D-Link Pages: 41

Brand: D-Link Pages: 99

Brand: D-Link Pages: 5

Brand: D-Link Pages: 15

AirPro DWL-6000AP

Brand: D-Link Pages: 65

Brand: BandLuxe Pages: 67

Brand: NavigateWorx Pages: 71

FrameSaver 9120

Brand: Paradyne Pages: 2

SAFETank Series

Brand: Raidon Pages: 49

Brand: F5 Pages: 72

Brand: REXROTH Pages: 68

MediaStream ConnectPlus 1000

Brand: Avid Technology Pages: 74

Brand: NETGEAR Pages: 2

Brand: Maxim Pages: 26

Brand: NetComm Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands