Lenovo LENOVOEMC PX6-300D User Manual Download | Manualshive

Page: 176 / 178

background image

European Union - Compliance to the Electromagnetic Compatibility Directive

This product is in conformity with the protection requirements of EU Council Directive 2004/108/EC on the
approximation of the laws of the Member States relating to electromagnetic compatibility. Lenovo cannot
accept responsibility for any failure to satisfy the protection requirements resulting from a non-
recommended modification of the product, including the installation of option cards from other
manufacturers.

This product has been tested and found to comply with the limits for Class B Information Technology
Equipment according to European Standard EN 55022. The limits for Class B equipment were derived for
typical residential environments to provide reasonable protection against interference with licensed
communication devices.

The Declaration of Conformity is available at http://support.lenovoemc.com/ce.

Important WEEE Information

The WEEE marking on Lenovo products applies to countries with WEEE and e-waste regulations (for
example, European Directive 2002/96/EC, India E-Waste Management & Handling Rules, 2011).
Appliances are labeled in accordance with local regulations concerning waste electrical and electronic
equipment (WEEE). These regulations determine the framework for the return and recycling of used
appliances as applicable within each geography. This label is applied to various products to indicate that
the product is not to be thrown away, but rather put in the established collection systems for reclaiming
these end-of-life products.

Country-specific information is available at http://www.lenovo.com/recycling.

European Union RoHS

Lenovo products sold in the European Union, on or after January 3, 2013, meet the requirements of the
European Union Directive 2011/65/EU; The Restriction of the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment (RoHS).

For more information about Lenovo progress on RoHS, go to:
http://www.lenovo.com/social_responsibility/us/en/RoHS_Communication.pdf

India RoHS

RoHS compliant as per E-Waste (Management & Handling) Rules, 2011.

Lithium Battery – California Perchlorate Information

This product contains a CR coin cell lithium battery which contains perchlorate material—special handling
may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate.

Legal

166

Regulatory Information

«
...
174
175
176
177
178
»

Summary of Contents for LENOVOEMC PX6-300D



















































































































































































Reviews:

No comments

Related manuals for LENOVOEMC PX6-300D

UR5i v2 Libratum

Brand: B+B SmartWorx Pages: 8

Brand: B+B SmartWorx Pages: 8

Brand: Cambium Networks Pages: 29

Brand: Dialogic Pages: 2

Brand: Barco Pages: 121

Brand: TANDBERG Pages: 3

Brand: Ruckus Wireless Pages: 2

Brand: Rosewill Pages: 10

Brand: MEDIATEK Pages: 166

OMB-DAQBOARD-500 Series

Brand: Omega Pages: 48

Brand: Solwise Pages: 7

Brand: LUX LUMEN Pages: 41

Acme Packet 3900

Brand: Oracle Pages: 70

Brand: Intel Pages: 20

Brand: KYLAND Technology Pages: 19

WAFER-EHL Series

Brand: IEI Technology Pages: 142

Brand: RadioSPECTRAL Pages: 2

Brand: ZALMAN Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands