Lenovo ideacentre 200 Hardware Maintenance Manual Download Page 102

Page: 102 / 140

Refer to the “Lithium coin-cell battery notice” in the

Safety, Warranty, and Setup

Guide

for information about replacing and disposing of the coin-cell battery.

To replace the coin-cell battery, do the following:

1. Remove any media from the drives and turn off all connected devices and

the computer. Then, disconnect all power cords from electrical outlets and
disconnect all cables that are connected to the computer.

2. Remove the front cover. See “Removing the front cover” on page 83.
3. Remove the system board frame. See “Replacing the system board frame”

on page 88.

4. Locate the coin-cell battery. See “Locating parts on the system board” on

page 45.

5. Remove the coin-cell battery.

Figure 22. Removing the coin-cell battery

6. Install a new coin-cell battery.

Figure 23. Installing a new coin-cell battery

7. Reinstall the system board frame. See “Replacing the system board frame”

on page 88.

8. Reinstall the front cover and connect the cables. See “Completing the parts

replacement” on page 107.

9. Turn on the computer and all connected devices.

ideacentre 200 Hardware Maintenance Manual

Summary of Contents for ideacentre 200












































































































































Search results

Summary of Contents for ideacentre 200

Reviews:

Lenovo ideacentre 200, Hardware Maintenance Manual, Page: 102 / 140

Search results

Summary of Contents for ideacentre 200

Reviews: