manualshive.com logo in svg

Lenovo Flex System EN4023, User Manual

Share
Download
Lenovo Flex System EN4023 User Manual Download Page 50

38

Lenovo Flex System EN4023 10Gb Scalable Switch User’s Guide 

Upgrading the switch firmware

3

Upgrading the switch firmware

After you locate the correct firmware to download to the ILenovo Flex System EN4023 10Gb 
Scalable Switch, you can use the firmware download interactive command to perform the 
download.

ATTENTION

The firmware download for the switch is disruptive. Make sure no traffic is flowing through the switch 
during the download process.

For specifics on how to perform the firmware download, refer to the chapter, “Installing and 
Maintaining Firmware,” in the 

Network OS Administrator’s Guide.

The following example shows the firmware download interactive command output.

EN4023# 

firmware download interactive

Server name or IP address: 

10.31.2.25

File name: 

/Software/Released/NOS/EN4023/Updates/nos4.0.0_bbd/nos4.0.0_bbd_rel_123/dist/rele

ase.plist

Protocol (ftp, scp, sftp): 

ftp

User: admin

Password: ***********

Reboot system after download? [y/n]:

n

Do Auto-Commit after Reboot? [y/n]:

yes

Performing system sanity check...

Do you want to continue? [y/n]:

y

Checking conditions for downloading to 4.0.0

You are running 'firmware download' with auto-reboot disabled. After firmware is 

downloaded, please reboot the system to activate the new firmware.

Preparing for firmware download...

Installing 9 packages. Please wait...

Preparing packages for installation...

man-1.6g-8

############################### [ 100% ]

Preparing packages for installation...

kernel-swbd138-2.6.34.6-1

############################### [ 100% ]

Preparing packages for installation...

agent-nos-common-4.0.0-1

############################### [ 100% ]

Preparing packages for installation...

fabos-4.0.0nos4.0.0_bbd_rel_131007_2000-15

############################### [ 100% ]

Preparing packages for installation...

fabos-vf-4.0.0-10

############################### [ 100% ]

Preparing packages for installation...

fabos-man-4.0.0-13

############################### [ 100% ]

Preparing packages for installation...

confd-3.7.6.3.brcd-3

############################### [ 100% ]

Preparing packages for installation...

Summary of Contents for Flex System EN4023











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands