Lenovo Flex System EN4023 User Manual Download | Manualshive

Page: 26 / 74

background image

14

Lenovo Flex System EN4023 10Gb Scalable Switch User’s Guide

Installing and removing an SFP+ or QSFP transceiver

2

FIGURE 4

QSFP transceiver

For information on supported components, go to the Lenovo Server Proven website at

http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/flex.html.

Installing a FC SFP+

For the FlexPort feature, the Lenovo Flex System EN4023 10Gb Scalable Switch only supports 8
Gbps and 16 Gbps SFP+ optical transceivers for Fibre Channel connections. FlexPort is supported
by Network OS 5.0.0 and later.

If you use an unqualified transceiver, the switchShow command output shows the port in a
Mod_Inv state. Fabric OS also logs the issue in the system error log.

Complete the following steps to install an FC SFP+ transceiver.

1. Making sure that the bail (wire handle) is in the unlocked position, position the optical

transceiver so that the key is oriented correctly to the port. Insert the transceiver into the port
until it is firmly seated and the latching mechanism clicks; then close the bail.

The 16 Gbps SFP+ transceivers do not have bails. Use the pull tab on the 16 Gbps SFP+
transceivers to help push the transceiver into the port. Do not push too hard on the tab itself
because it can bend.

Transceivers are keyed so that they can only be inserted with the correct orientation. If a
transceiver does not slide in easily, ensure that it is correctly oriented.

2. Position a cable so that the key (the ridge on one side of the cable connector) is aligned with

the slot in the transceiver. Insert the cable into the transceiver until the latching mechanism
clicks.

Cables are keyed so that they can be inserted in only one way. If a cable does not slide in
easily, ensure that it is correctly oriented.

NOTE

Each SFP+ has a 10-pad gold-plated PCB-edge connector on the bottom. The correct position to
insert an SFP+ into the upper row of ports is with the gold edge down. The correct position to insert
an SFP+ into the lower row of ports is with the gold edge up.

«
...
24
25
26
27
28
...
»

Summary of Contents for Flex System EN4023











































































Reviews:

No comments

Related manuals for Flex System EN4023

COOPER POWER SERIES

Brand: Eaton Pages: 24

COOPER POWER SERIES

Brand: Eaton Pages: 16

Crouse-hinds series

Brand: Eaton Pages: 16

Cutler-Hammer AMPGARD

Brand: Eaton Pages: 4

Brand: H3C Pages: 204

H3C S7500E Series

Brand: H3C Pages: 44

H3C S7500E Series

Brand: H3C Pages: 11

H3C S7500E Series

Brand: H3C Pages: 25

Brand: H3C Pages: 46

Brand: United Electric Controls Pages: 6

Brand: rako Pages: 4

Brand: DAITEM Pages: 37

CN8000 KVM on the NET

Brand: ATEN Pages: 2

Brand: Datavideo Pages: 38

IES8242MPp9H-S-DR

Brand: OTS Pages: 3

Brand: Konig Pages: 40

Brand: Omron Pages: 4

Brand: Brightlink Pages: 17

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands