Lenovo EMC PX4-300D User Manual Download | Manualshive

Page: 57 / 164

background image

Understanding How Your Content Is Stored

Content on your px4-300d Network Storage is stored in

Shares

and iSCSI volumes. To access content in

Shares, your client computer uses network

protocols

, such as AFP and Windows File Sharing. The px4-

300d's file system maintains the physical location of content that resides in volumes used for Shares.
Block-level data is stored in iSCSI drives. File systems for iSCSI volumes are maintained by the
connected host computer and not the px4-300d.

Shares reside on volumes, which along with iSCSI volumes, reside in Storage Pools. Volumes allow you
to partition space in Storage Pools, and Storage Pools group multiple physical drives together into a single
logical unit to provide redundancy, availability and capacity. All the drives in a Storage Pool must be the
same size and should have the same protection (for example, RAID 1 RAID 5).

All disks within a single Storage Pool must meet the following requirements:

●

Same manufacturer

●

Same rotational speed

●

Same capacity

Mixed disk configurations may result in unpredictable device behavior and will not be supported. If
you need technical assistance, please be prepared to backup your data and remove any
unsupported drives or configurations.

Storage Pools

A Storage Pool is a grouping of drives with a certain storage size and an assigned data protection. A
Storage Pool has a minimum of one drive. By default, your px4-300d has one Storage Pool.

Storage Pool Data Protection

For each Storage Pool, you can select its type of protection. Protection type determines how data is
replicated across a Storage Pool and determines the amount of space used for data protection and
storage. The drives in your px4-300d are protected using a built-in, pre-configured technology that
redundantly stores data across the drives, so that if a single drive fails, in most cases, you will not lose any
data. This technology, known as RAID (Redundant Array of Independent Disks), enables a series of
drives to act together as a single storage system. If you create multiple Storage Pools, you can assign
different

RAID types

to each Storage Pool.

For more information on selecting RAID types, refer to

Changing RAID Protection Types

.

Volumes

A Volume is a single storage area. A volume can be comprised of one or more hard drives. In a single-
volume system, the volume consists of the entire storage space. Shares reside in volumes. iSCSI drives
also reside in volumes.

Storage Pool Management

47

Understanding How Your Content Is Stored

«
...
55
56
57
58
59
...
»

Summary of Contents for EMC PX4-300D





































































































































































Reviews:

No comments

Related manuals for EMC PX4-300D

Brand: Packard Bell Pages: 18

truVision 11c Series

Brand: Interlogix Pages: 20

Brand: Speco Pages: 12

Brand: Vacron Pages: 34

Brand: RapidOS Pages: 80

Brand: Gatekeeper Pages: 151

Brand: Teac Pages: 43

Brand: OpenEye Pages: 17

Brand: XVision Pages: 114

Brand: NEC Pages: 63

Brand: Idis Pages: 57

Brand: Wave Pages: 2

Brand: Pinetron Pages: 87

Brand: Lorex Pages: 2

ECO2 LH130 Series

Brand: Lorex Pages: 2

QLR-0440 Series

Brand: Lorex Pages: 55

Brand: Lorex Pages: 75

Brand: Lorex Pages: 54

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands