manualshive.com logo in svg

Lenovo EMC PX4-300D, User Manual

Share
Download
Lenovo EMC PX4-300D User Manual Download Page 162

European Union - Compliance to the Electromagnetic Compatibility Directive

This product is in conformity with the protection requirements of EU Council Directive 2004/108/EC on the 
approximation of the laws of the Member States relating to electromagnetic compatibility. Lenovo cannot 
accept responsibility for any failure to satisfy the protection requirements resulting from a non-
recommended modification of the product, including the installation of option cards from other 
manufacturers.

This product has been tested and found to comply with the limits for Class B Information Technology 
Equipment according to European Standard EN 55022. The limits for Class B equipment were derived for 
typical residential environments to provide reasonable protection against interference with licensed 
communication devices.

The Declaration of Conformity is available at http://support.lenovoemc.com/ce.

Important WEEE Information

The WEEE marking on Lenovo products applies to countries with WEEE and e-waste regulations (for 
example, European Directive 2002/96/EC, India E-Waste Management & Handling Rules, 2011). 
Appliances are labeled in accordance with local regulations concerning waste electrical and electronic 
equipment (WEEE). These regulations determine the framework for the return and recycling of used 
appliances as applicable within each geography. This label is applied to various products to indicate that 
the product is not to be thrown away, but rather put in the established collection systems for reclaiming 
these end-of-life products.

Country-specific information is available at http://www.lenovo.com/recycling.

European Union RoHS

Lenovo products sold in the European Union, on or after January 3, 2013, meet the requirements of the 
European Union Directive 2011/65/EU; The Restriction of the Use of Certain Hazardous Substances in 
Electrical and Electronic Equipment (RoHS).

For more information about Lenovo progress on RoHS, go to: 
http://www.lenovo.com/social_responsibility/us/en/RoHS_Communication.pdf

India RoHS

RoHS compliant as per E-Waste (Management & Handling) Rules, 2011.

Lithium Battery – California Perchlorate Information

This product contains a CR coin cell lithium battery which contains perchlorate material—special handling 
may apply. 
See www.dtsc.ca.gov/hazardouswaste/perchlorate.

Legal

152

Regulatory Information

Summary of Contents for EMC PX4-300D





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands