Lenovo Cleaner E2 Pro, User Manual

Page: 12 / 28

Power on and off the machine
Charging
Sweeping/Pause
Virtual wall (optional)
Use Instructions
Note: The main unit in the charging state cannot be powered off.
Note: If the main unit fails to find the dock, it will automatically return to the
starting point. In this case, manually put the main unit back to the dock for
charging.
Note: Fix the magnetic strip to the ground to avoid peeling off; otherwise
affecting the result of the visual wall.
Note:
·The machine cannot clean liquid.
·If the power is lower than 15%, the machine cannot work. Therefore, charge the
machine before sweeping.
·If the power is lower than 15% during sweeping, the machine will automatically
return back to the dock for charging.
·Before cleaning, tidy up all kinds of wires on the ground (including the power
cord of the dock). Otherwise, the machine may drag the wires while cleaning,
which may cause power failures of other electric appliance or damage items
or wires.
Tap and hold the button for 3 seconds to power on the machine.
Then, the power indicator is on, and the vacuum cleaner enters the
standby state. Tap and hold the button for 3 seconds to power
off the machine.
Auto mode: After cleaning, the main unit automatically returns to
the dock for charging.
Manual mode: In the pause state, press the button to activate the
“return for charging” mode or use the controller or the smart APP
for charging.
Once the machine powers on, tap the button on the main unit
or use the controller or the smart APP to start sweeping.
The magnetic strip can be set to separate restricted zones (such as
washing rooms and kitchens).
Magnetic strip
EN 10