background image

Use Restrictions

• This machine is only used for floor cleaning at home. Please do not use it outdoors (such as an open balcony), non-ground 

   area (such as a sofa),and commercial or industrial environment.

• Do not use the machine in suspended environments without protective fences, such as duplex floors, open balconies, and 

   top of the furniture.

• Do not use the product in an environment where the temperature is above 40°C or below 0°C, or there are liquids and 

  viscous objects on the ground.

• Hang up the ground cable at home before use to avoid dragging the cable when the machine is running.

• Put away the fragile objects and sundries (such as vases and plastic bags) on the ground. Otherwise, the machine may be 

   blocked or a slight collision may cause damage to valuables at home.

• Keep the machine away from people (including children) with physical, mental or sensory impairments.

• Do not allow children to use the machine as a toy. Please keep children and pets away from the machine when the machine 

   is running.

• Keep the cleaning brush at a place that cannot be reached by children.

• Do not place any object (including children and pets) on the stationary or moving machine.

• When the machine is working, keep the hair of humans or pets or fingers far away from the suction port of the machine.

• Do not use the machine to clean burning objects, such as unextinguished cigarette butts.

• Do not use the machine to clean long-haired carpets. Some dark carpets may not be cleaned normally.

• Do not use the machine to vacuum hard or sharp objects, such as decoration waste, glass, and iron nails.

• Please clean or maintain the machine and docking station when the machine is powered off or when the power supply is 

   disconnected.

• Do not use a damp cloth or any liquid to wipe any part of the machine.

• Please follow the instructions in this manual when using the machine. The user should be liable for any loss and injury caused 

   by improper use.

• Do not use the mopping function on the carpet or the top of the furniture.

• Remove the water tank when charging the machine.

• Do not use on total black carpets or floors

.

Use Restrictions

• Do not use any third-party batteries, docking stations, or chargers.

• Do not disassemble, repair, or modify the battery or docking station without permission.

• Do not place the docking station near heat sources, such as radiators.

• Do not use a damp cloth or wet hands to wipe or clean the docking station shrapnel.

• Dispose used batteries properly, and send them to professional recycling agencies.

• If the power cord is damaged or broken, stop using it immediately and buy a new one through official channels.

• To transport the machine, ensure that the machine is powered off. It is recommended that you use the original box for 

   packaging.

• If you do not use the machine for a long time, power it off and keep it in a dry and cool place. Charge the machine at least 

   once every 3 months to avoid damage to the battery due to excessive discharge.

EN 01

Summary of Contents for Cleaner E2 Pro





























Reviews: