Lenovo B575e Hardware Maintenance Manual Download Page 5

Page: 5 / 102

About this manual

This manual provides service and reference information for the following Lenovo

products.

Machine

Machine type (MT)

Lenovo B575e

3685, 20189

Use this manual to troubleshoot problems.

The manual is divided into the following sections:

• The common sections provide general information, guidelines, and safety information required for

servicing computers.

• The product-specific sections include service, reference, and product-specific parts information.

Important:

• This manual is intended only for trained service technicians who are familiar with Lenovo products. Use

this manual to troubleshoot problems effectively.

• Before servicing a Lenovo product, be sure to read all the information under Chapter 1 “Safety

information” on page 1 and Chapter 2 “Important service information” on page 27.

iii

Summary of Contents for B575e







































































































Search results

Summary of Contents for B575e

Reviews:

Lenovo B575e, Hardware Maintenance Manual, Page: 5 / 102

Search results

Summary of Contents for B575e

Reviews: