Lenovo 70LU User Manual And Hardware Maintenance Manual Download Page 38

Page: 38 / 142

• “Startup menu” on page 27

• “Exit menu” on page 28

Main menu

After entering the Setup Utility program, you can see the

Main

menu. The menu lists basic information about

your server, such as the BIOS, CPU type, memory, and system date and time.

Devices menu

You can view or change various device settings on the

Devices

menu in the Setup Utility program. Some

items are displayed on the menu only if the server supports the corresponding features.

The

Devices

menu contains the following items.

Menu item

Description

Serial Port Setup

View and set serial port configuration parameters.

USB Setup

View and set USB configuration parameters.

ATA Drive Setup

View and set SATA storage drive configuration parameters.

Video Setup

View and set the primary video adapter type.

Audio Setup

Enable or disable the onboard audio controller.

Network Setup

Enable or disable the onboard Ethernet controller and other network features.

Advanced menu

You can view or change various server component settings on the

Advanced

menu in the Setup Utility

program. The

Advanced

menu contains various configuration items. Some items are displayed on the menu

only if the server supports the corresponding features.

The

Advanced

menu contains the following items.

Menu item

Description

CPU Setup

View information about the installed CPU and set CPU configuration parameters.

Intel

Manageability

View and set Intel Manageability configuration parameters.

Intel SIPP Support

Enable or disable the Intel SIPP Support feature.

CPU CRID Support

Enable or disable the CPU CRID Support feature.

Chipset CRID support

Enable or disable the Chipset CRID Support feature.

Power menu

You can view or change server power options on the

Power

menu in the Setup Utility program.

The

Power

menu contains the following items.

Menu item

Description

After Power Loss

View and configure the system performance after the ac power is interrupted.

Enhanced Power Saving Mode

Enable or disable Enhanced Power Saving Mode.

ThinkServer TS150 User Guide and Hardware Maintenance Manual

Summary of Contents for 70LU















































































































































Search results

Summary of Contents for 70LU

Reviews:

Brands by name

Popular brands

Lenovo 70LU, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for 70LU

Reviews:

Brands by name

Popular brands