Lenovo 70LU User Manual And Hardware Maintenance Manual Download Page 31

Page: 31 / 142

Figure 8. Connecting the 1-to-4 mini-SAS cable

From connectors of the cable

To connectors of the storage drives

Connector

Signal connector on the first storage drive

Connector

Signal connector on the second storage drive

Connector

Signal connector on the third storage drive

Connector

Signal connector on the fourth storage drive

• If your server has five storage drives installed, connect the first four drives using the 1-to-4 mini-SAS

signal cable. Then, connect the fifth storage drive using the 1-to-1 mini-SAS signal cable:

1. Connect one end of the 1-to-1 mini-SAS signal cable to connector 1 on the adapter.

2. Connect the other end of the cable to the signal connector of the storage drive.

System board components

The following illustration shows the component locations on the system board.

Chapter 3

Product overview

Summary of Contents for 70LU















































































































































Search results

Summary of Contents for 70LU

Reviews:

Brands by name

Popular brands

Lenovo 70LU, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for 70LU

Reviews:

Brands by name

Popular brands