Selecting or changing the startup device sequence
To view or permanently change the configured startup device sequence, do the
following:
1.
Start the Setup Utility program. See “Starting the Setup Utility program” on
page 57.
2.
Select
Startup
→
Startup Sequence
. See the information displayed on the right
side of the screen.
3.
Select the devices for the Primary Startup Sequence, the Automatic Startup
Sequence, and the Error Startup Sequence.
4.
Select
Exit
from the Setup Utility menu and then
Save Settings
or
Save and
exit the Setup Utility
.
If you have changed these settings and want to return to the default settings, select
Load Default Settings
on the
Exit
menu.
Exiting from the Setup Utility program
After you finish viewing or changing settings, press Esc to return to the Setup
Utility program menu (you might have to press Esc several times). If you want to
save the new settings, select
Save Settings
or
Save and exit the Setup Utility
.
Otherwise, your changes will not be saved.
60
User Guide
Summary of Contents for 6138A1U
