Lenovo 6138A1U, User Manual

Page: 38 / 92

5. Remove the hard disk drive cage from the chassis by simply sliding it
outward.
6.
Pull on the blue handle
3
to release and remove the hard disk drive from
the drive cage.
7. Remove the hard disk drive from the blue bracket by flexing the sides of the
bracket enough to slide it free from the hard disk drive.
8. To install a new hard disk drive into the blue bracket, flex the bracket and
align pin
1
, pin
2
, pin
3
, and pin
4
on the bracket with the holes in
the hard disk drive. Do not touch the circuit board
5
on the bottom of the
hard disk drive.
9. Slide the new hard disk drive into the drive cage until it snaps into position.
Figure 21. Installing the primary hard disk drive into the bracket
30
User Guide