Selecting or changing the startup device sequence
To view or permanently change the configured startup device sequence, do the
following:
1.
Start the Setup Utility program. See “Starting the Setup Utility program” on
page 45.
2.
From the Setup Utility program main menu, select
Startup
.
3.
Select the devices for the Primary Startup Sequence, the Automatic Startup
Sequence, and the Error Startup Sequence. Read the information displayed on
the right side of the screen.
4.
Press F10 to save and exit the Setup Utility program. See “Exiting from the
Setup Utility program.”
Exiting from the Setup Utility program
After you finish viewing or changing settings, press Esc to return to the Setup
Utility program main menu. You might have to press Esc several times. Do one of
the following:
v
If you want to save the new settings, press F10 to save and exit the Setup Utility
program.
v
If you do not want to save the settings, select
Exit
→
Discard Changes and Exit
.
v
If you want to return to the default settings, press F9 to load the default settings.
48
User Guide
Summary of Contents for 3692A3U
