Lenovo 30BX User Manual Download Page 66

Page: 66 / 150

The playback is slow or choppy.

Solutions:

• Disable any background programs, such as AntiVirus or Desktop Themes.

• Ensure that video resolution is lower than 1152 x 864 pixels.

A message indicating invalid disc or no disc found is displayed.

Solutions:

• Ensure that the disc is in the drive with the shiny side of the disc facing down.

• Ensure that video resolution is lower than 1152 x 864 pixels.

• Ensure that the DVD or CD is inserted into an appropriate optical drive. For example, do not insert a DVD

into a CD-only drive.

Intermittent problems

Intermittent problems refer to the problems occur only occasionally and are difficult to repeat.

Solutions:

• Ensure that all cables and cords are securely connected to the computer and attached devices.

• Ensure that when the computer is on, the fan grill is not blocked (there is air flow around the grill), and the

fans are working. If airflow is blocked or the fans are not working, the computer might overheat.

• If Small Computer System Interface (SCSI) devices are installed, ensure that the last external device in

each SCSI chain is terminated correctly. For more information, see your SCSI documentation.

Storage drive problems

Some or all storage drives are missing from the Setup Utility program.

Solutions:

• Ensure that the signal cables and power cables for all the storage drives are connected correctly.

• If the computer is installed with SAS storage drives, ensure that the AVAGO MegaRAID adapter is

correctly connected.

The computer cannot start up from the correct storage drive or the message “No Operating System
Found” is displayed.

Solutions:

• Ensure that the signal cables and power cables for all the storage drives are connected correctly.

• Ensure that the computer starts up from the correct storage drive. Set the storage drive, on which the

operating system resides, as the first startup device in the Setup Utility program. Refer to “Changing the
startup device sequence permanently” on page 39.

Note:

In rare cases, the storage drive with the operating system might get corrupted or damaged. If this

problem occurs, replace the storage drive. Refer to Chapter 7 “Hardware removal and installation” on page
61.

Ethernet LAN problems

The computer cannot connect to an Ethernet LAN.

Solutions:

P520c User Guide

Summary of Contents for 30BX























































































































































Search results

Summary of Contents for 30BX

Reviews:

Related manuals for 30BX

Brands by name

Popular brands

Lenovo 30BX, User Manual

Search results

Summary of Contents for 30BX

Reviews:

Related manuals for 30BX

Brands by name

Popular brands