Lenovo 30BX User Manual Download Page 133 | Manualshive

Page: 133 / 150

background image

Appendix C. Regulatory information

The latest compliance information is available at:

http://www.lenovo.com/compliance

Export classification notice

This product is subject to the United States Export Administration Regulations (EAR) and has an Export
Classification Control Number (ECCN) of 5A992.c. It can be re-exported except to any of the embargoed
countries in the EAR E1 country list.

Electronic emissions notices

Federal Communications Commission Declaration of Conformity

The following information refers to Lenovo personal computer machine types 30BY, 30BX, and 30C0.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult an authorized dealer or service representative for help.

Lenovo is not responsible for any radio or television interference caused by using other than specified or
recommended cables and connectors or by unauthorized changes or modifications to this equipment.
Unauthorized changes or modifications could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

Responsible Party:
Lenovo (United States) Incorporated
1009 Think Place - Building One
Morrisville, NC 27560
Phone Number: 919-294-5900

Industry Canada Class B emission compliance statement

CAN ICES-3(B)/NMB-3(B)

© Copyright Lenovo 2017

119

«
...
131
132
133
134
135
...
»

Summary of Contents for 30BX























































































































































Reviews:

No comments

Related manuals for 30BX

Brand: Ruijie Networks Pages: 30

Brand: Asus Pages: 54

Brand: Asus Pages: 70

AAEON BOXER-6710

Brand: Asus Pages: 75

Brand: Asus Pages: 70

Brand: Asus Pages: 50

Brand: Asus Pages: 64

Brand: Asus Pages: 70

Brand: Asus Pages: 62

Brand: Asus Pages: 71

Brand: Asus Pages: 76

Brand: Asus Pages: 74

Brand: Asus Pages: 60

Brand: Asus Pages: 68

Brand: Asus Pages: 2

Brand: Asus Pages: 66

Essentio CM5571

Brand: Asus Pages: 122

Brand: Asus Pages: 130

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands