8. Insert the new M.2 solid-state drive into the slot at an angle of about 20 degrees
1
and pivot the M.2
solid-state drive downward
2
. Install the screw
3
to secure the M.2 solid-state drive.
9. Reinstall the long bracket into place
1 2
. Then, install the screw
3
and tighten the screw
4
.
10. Reinstall the base cover assembly.
11. Turn the computer over. Connect the ac power adapter and all disconnected cables to the computer.
12. If you install a new Intel Optane memory, enable Intel Optane memory by doing the following:
a. Restart your computer. When the logo screen is displayed, immediately press F1 to enter the UEFI
BIOS menu.
b. Select
Config
➙
Storage
➙
Controller mode
. Ensure that
RST mode
is selected.
c. Go to
. Download and install the Intel Rapid Storage Technology (iRST)
Console with Device Driver on your computer.
d. Run the iRST Console with Device Driver.
e. Click
Intel® Optane™ Memory
and then follow the instructions on the screen to enable it.
48
E590, R590 and E595 User Guide
Summary of Contents for 20NB
