Lenovo 1271, Hardware Maintenance Manual

Page: 45 / 170

Select the problem your computer is experiencing from the following list:
• “Audio problems” on page 41
• “CD problems” on page 42
• “DVD problems” on page 43
• “Intermittent problems” on page 44
• “Hard disk drive problems” on page 45
• “Keyboard, mouse, or pointing device problems” on page 45
• “Monitor problems” on page 47
• “Networking problems” on page 49
• “Option problems” on page 51
• “Performance and lockup problems” on page 52
• “Printer problems” on page 54
• “Serial port problems” on page 54
• “Software problems” on page 54
• “USB problems” on page 55
Audio problems
Select your symptom from the following list:
• “No audio in Windows” on page 41
• “An audio disc or AutoPlay-enabled disc does not automatically play when it is inserted into a drive”
on page 42
• “Sound comes from one external speaker only” on page 42
• “No audio in DOS applications or games” on page 42
No audio in Windows
Symptom: No audio in Windows
Actions:
• If you are using powered external speakers that have an On/Off control, verify that the On/Off control is
set to the On position and the speaker power cable is connected to a properly grounded, functional ac
electrical outlet.
• If your external speakers have a volume control, verify that the volume control is not set too low.
• Double-click the speaker icon in the Windows notification area. A master volume-control window opens.
Verify that the Mute settings are not checked and none of the volume settings is set too low.
• Verify that your external speakers (and headphones, if used) are connected to the correct audio connector
on the computer. Most speaker cables are color-coded to match the connector.
Note: When external-speaker or headphone cables are attached to the audio connector, the internal
speaker, if present, is disabled. In most cases, if an audio adapter is installed in one of the expansion slots,
the audio function built into the system board is disabled; use the audio jacks on the adapter.
• Make sure that the program you are running is designed for use in the Microsoft Windows operating
system. If the program is designed to run in DOS, the program does not use the Windows sound feature
and must be configured to use SoundBlaster Pro or SoundBlaster emulation.
• Verify that the audio device drivers are correctly installed. See Microsoft Windows help system for more
information.
Chapter 5
.
Troubleshooting and diagnostics
41