manualshive.com logo in svg

Lenovo 11DN005EUS, User Manual, Page: 9 / 106

Share
Download
Lenovo 11DN005EUS User Manual Download Page 9

Rear

1. Optional connectors*

Depending on the computer model, the connector might vary.

2. Security-lock slot

Lock your computer to a desk, table, or other fixtures through a Kensington-style 
cable lock.

3. Wi-Fi

® 

antenna slot*

Used to install the rear Wi-Fi antenna cable connector that is available only on 
some models. The rear Wi-Fi antenna is installed on the rear Wi-Fi antenna cable 
connector.

4. Ethernet connector

Connect to a local area network (LAN). When the green indicator is on, the 
computer is connected to a LAN. When the yellow indicator blinks, data is being 
transmitted.

5. USB 3.2 connector Gen 2

Connect USB-compatible devices, such as a USB keyboard, USB mouse, USB 
storage device, or USB printer.

6. USB 3.2 connector Gen 1 
(M70q) / Gen 2 (M80q)

Connect USB-compatible devices, such as a USB keyboard, USB mouse, USB 
storage device, or USB printer.

7. USB 3.2 connector Gen 1

Connect USB-compatible devices, such as a USB keyboard, USB mouse, USB 
storage device, or USB printer. This connector supports the smart power-on 
feature. For more information, see “Enable or disable the smart power-on feature” 
on page 19.

8. HDMI

TM 

1.4 out connector

Send audio and video signals from the computer to another audio or video device, 
such as a high-performance monitor.

9. USB 3.2 connector Gen 1

Connect USB-compatible devices, such as a USB keyboard, USB mouse, USB 
storage device, or USB printer.

Chapter 1

.

Meet your computer

3

Summary of Contents for 11DN005EUS











































































































Reviews:

No comments