Lenovo 11DN005EUS User Manual Download Page 7

Page: 7 / 106

Chapter 1. Meet your computer

Front

1. ThinkCentre

LED

This indicator is on when the computer is on.

2. Power button

Press to turn on the computer.

To turn off the computer, open the

Start

menu, click

Power

, and then select

Shut down

The indicator in the power button shows the system status of your computer.

•

On:

The computer is on.

•

Off:

The computer is off or in hibernation mode.

•

Blinking:

The computer is in sleep mode.

3. Storage drive activity indicator

This indicator is on when the storage drive is in use.

4. USB-C

™

(3.2 Gen 1) connector

• Charge USB-C compatible devices with the output voltage and current of 5 V

and 0.9 A.

• Transfer data at USB 3.2 speed, up to 5 Gbps.

• Connect to USB-C accessories to help expand your computer functionality. To

purchase USB-C accessories, go to

https://www.lenovo.com/accessories

Summary of Contents for 11DN005EUS











































































































Search results

Summary of Contents for 11DN005EUS

Reviews:

Lenovo 11DN005EUS, User Manual, Page: 7 / 106

Search results

Summary of Contents for 11DN005EUS

Reviews: