manualshive.com logo in svg

Lenovo 11DN005EUS, User Manual, Page: 99 / 106

Share
Download
Lenovo 11DN005EUS User Manual Download Page 99

This product has been tested and found to comply with the limits for Class B equipment according to 
European Standards harmonized in the Directives in compliance. The Class B requirements for equipment 
are intended to offer adequate protection to broadcast services within residential environments.

EU ErP (EcoDesign) Directive (2009/125/EC) - external power adapters (Regulation (EU) 2019/1782)

Lenovo products are designed to work with a range of compatible power adapters. Access 

https:// 

www.lenovo.com/us/en/compliance/eu-doc

to view the compatible power adapters. For the detailed power 

adapter specifications for your computer, go to 

https://support.lenovo.com

.

German Class B compliance statement

Hinweis zur Einhaltung der Klasse B zur elektromagnetischen Verträglichkeit

Dieses Produkt entspricht den Schutzanforderungen der EU-Richtlinie zur elektromagnetischen 
Verträglichkeit Angleichung der Rechtsvorschriften über die elektromagnetische Verträglichkeit in den EU- 
Mitgliedsstaaten und hält die Grenzwerte der Klasse B der Norm gemäß Richtlinie.

Um dieses sicherzustellen, sind die Geräte wie in den Handbüchern beschrieben zu installieren und zu 
betreiben. Des Weiteren dürfen auch nur von der Lenovo empfohlene Kabel angeschlossen werden. Lenovo 
übernimmt keine Verantwortung für die Einhaltung der Schutzanforderungen, wenn das Produkt ohne 
Zustimmung der Lenovo verändert bzw. wenn Erweiterungskomponenten von Fremdherstellern ohne 
Empfehlung der Lenovo gesteckt/eingebaut werden.

Zulassungsbescheinigung laut dem Deutschen Gesetz über die elektromagnetische Verträglichkeit von 
Betriebsmitteln, EMVG vom 20. Juli 2007 (früher Gesetz über die elektromagnetische Verträglichkeit von 
Geräten), bzw. der EU Richtlinie 2014/30/EU, der EU Richtlinie 2014/53/EU Artikel 3.1b), für Geräte der 
Klasse B.

Dieses Gerät ist berechtigt, in Übereinstimmung mit dem Deutschen EMVG das EG-Konformitätszeichen - 
CE - zu führen. Verantwortlich für die Konformitätserklärung nach Paragraf 5 des EMVG ist die Lenovo 
(Deutschland) GmbH, Meitnerstr. 9, D-70563 Stuttgart.

Japan VCCI Class B compliance statement

Japan compliance statement for products which connect to the power 
mains with rated current less than or equal to 20 A per phase

Japan notice for ac power cord

The ac power cord shipped with your product can be used only for this specific product. Do not use the ac 
power cord for other devices.

Appendix D. Compliance and TCO Certified information

93

Summary of Contents for 11DN005EUS











































































































Reviews:

No comments