Lenovo 10AS User Manual Download Page 108

Page: 108 / 148

Actions:

• Restart the DVD player program.

• Close any open files, turn off the computer, and then restart the computer.

• Try a lower screen resolution or color depth.

If these actions do not correct the problem, run the diagnostic programs (see “Diagnostic programs” on
page 108 for instructions). If you need technical assistance, see Chapter 11 “Getting information, help, and
service” on page 111.

DVD movie will not play

Symptom: DVD movie will not play.

Actions:

• Make sure that the disc surface is clean and not scratched.

• Check the disc or package for regional coding. You might need to purchase a disc with coding for

the region where you are using your computer.

No audio or intermittent audio while playing DVD movie

Symptom: No audio or intermittent audio while playing DVD movie.

Actions:

• Check the volume control settings on your computer and on your speakers.

• Make sure that the disc surface is clean and not scratched.

• Check all cable connections to and from the speakers.

• Use the DVD menu for the video to select a different audio track.

Playback is very slow or choppy

Symptom: Playback is very slow or choppy.

Actions:

• Disable any background programs, such as AntiVirus or Desktop Themes.

• Ensure that video resolution is set to less than 1152 x 864.

Invalid disc or no disc found message

Symptom: Invalid disc or no disc found message

Actions:

ThinkCentre E73 User Guide

Summary of Contents for 10AS





















































































































































Search results

Summary of Contents for 10AS

Reviews:

Lenovo 10AS, User Manual, Page: 108 / 148

Search results

Summary of Contents for 10AS

Reviews: