Lennox XC17-024, User Manual, Page: 5 / 52

XC17 - 2 to 5 Ton Air Conditioner / Page 5
icomfort™ Touch Communicating Thermostat
(part of the icomfort Residential Communicating
Control System)
The icomfort™ Touch
communicating thermostat
recognizes and connects to
all icomfort enabled products
to automatically configure
and control the system
(based on user-specified
settings) for the highest level
of comfort, performance and
efficiency. Also recognizes model and serial number
information for icomfort-enabled products to simplify
installation.
Large full color touchscreen - no hidden buttons or
doors.
A simple easy-to-use menu-driven touchscreen allows
complete system configuration. Scheduled maintenance
alerts, system warnings and troubleshooting are also
displayed in simple English on thermostat screen.
Non-icomfort-enabled products can easily be added and
controlled by the icomfort Touch thermostat.
A tabbed interface lists all programming options on the
screen.
Installer setup screens allow quick and simple system
configuration without a manual, Installer can also run
tests on complete system or individual components for
easy maintenance and troubleshooting.
Serial communications bus (RSBus), with less wiring
than a conventional heating/cooling system, allows
system communication. Uses 4-wire, 18-gauge
standard thermostat wiring.
See the icomfort™ Touch Communicating Thermostat
Engineering Handbook bulletin in the Controls section
for more information.
Discharge Air Temperature Sensor
Used with icomfort Touch thermostat.
When installed in the supply air plenum, the discharge
air temperature sensor allows the icomfort thermostat
to control low and high stage heating temperatures.
Sensor is auto-detected when connected to thermostat.
Remote Outdoor Sensor
Used with icomfort Touch thermostat.
When installed outdoors, sensor
allows thermostat to display outdoor
temperature. Sensor is auto-detected
when connected to thermostat.
NOTE - Sensor is required for
Humiditrol
®
applications.
ComfortSense
®
7000 Touchscreen Thermostat
Electronic 7-day, universal, multi-stage, programmable,
touchscreen thermostat.
4 Heat/2 Cool.
Auto-changeover.
Controls humidity during
cooling mode.
Offers enhanced capabilities
including humidification /
dehumidification / dewpoint
measurement and control, Humiditrol
®
control, and
equipment maintenance reminders.
Easy-to-use, menu driven thermostat with a back-lit,
LCD touchscreen.
Remote outdoor temperature sensor (optional) allows
the thermostat to display outdoor temperature. Required
in dual-fuel and Humiditrol
®
applications.
See the ComfortSense
®
7000 Engineering Handbook
bulletin in the Controls section for more information.
Outdoor Temperature Sensor
Used with ComfortSense 7000
thermostat.
When installed outdoors, sensor
allows thermostat to display outdoor
temperature. Sensor is auto-detected
when connected to thermostat.
NOTE - Sensor is required for
Humiditrol
®
applications.
Thermostat
Thermostat is not furnished with unit.
See Thermostat bulletins in Controls Section and
Lennox Price Book for selection.
INDOOR RH 26%
WED AN 21 12:35AM
MODE
ON
AUTO
HOME SCHEDULE OPTIONS
SET AT
SET AT
HEAT
COOL
SCHED
FEATURES