18
NOTE -
Each communication wire from the MS box should follow the refrigerant piping for that port.
Figure 16. Typical Communication Wiring Diagram (VRF Heat Recovery System)
P Q
All shields of shielded cable connect to chassis GROUND terminal at MS Boxes and Indoor Units.
18 GA., stranded, 2-conductor, shielded control wire (polarity sensitive).
Typical Wiring Diagram, NEC/CEC and Local Codes apply.
Outdoor unit
Outdoor unit
(sub1 unit)
Outdoor unit
(sub2 unit)
(PQ)
(main unit)
(PQ)
MS
Box
(PQ)
(PQ)
MS
Box
(PQ)
(PQ)
(H1 H2 ) (H1 H2 )
(H1 H2 )
Outdoor Unit Communication Terminal Block
P
Q
H1 H2
X
Y
O
A
K1 K2
MS Box Communication
Terminal Block
P
Q
Indoor Unit Communication Terminal Block
HA HB 12V COM P
Q
Ground cable shield
to MS Box
and Indoor Unit chassis
Install a terminating resistor (Ω120) at the last indoor unit terminals P and Q of the daisy chain.
