IOM / MINIAIR-0507
15
M
INI
A
IR
+
S
ECTION
10
–
P
RESENTATION
10.1 Manual presentation
This instruction manual supplies the necessary information for the transportation, the installation, operation and
maintenance of the
apparatus as supplied by the company LENNOX (from this point named as the supplier).
It supplies the user with as much information as is normally useful for a correct and secure installation of the unit.
Lack of observation of the details found within this manual, and an inadequate installation of the may cause
the withdrawal of the warranty supplied with the equipment.
Furthermore, the Supplier will not respond to any eventual damage, whether direct or indirect, caused by the incorrect
installation, or for damages caused by the installation being effectuated by inexperienced or unauthorised personnel.
Verify, upon acquisition, that the apparatus is complete and supplied as described.
Any eventual disputes must be presented in writing within 8 days from the reception of the goods.
10.2 Machine identification
The Unit is provided with identification plate listing the following:
-
Address of Constructor
-
“CE” Mark
-
Model
-
Serial Number
-
Maximum Current absorbed in “A”
-
Power supply voltage in “V”
-
Power supply frequency in “Hz”
-
Number of phases indicated
with “Ph”
-
Date of fabrication
-
Gross weight in “Kg”
S
ECTION
11
–
T
ECHNICAL
C
HARACTERISTICS
11.1 General characteristics
Completely removable aluzink plate side panels.
Panel thermal and acoustic insulation by means of polyethylene/polyester panels with a medium thickness of 20
mm.
High efficiency aluminium plate static type heat recuperators, with air flows separated by special seals.
UE3 efficiency air filters, which may be easily removed from the sides allowing their periodic cleaning.
Fan bodies mounted on anti-vibrators.
Double inlet centrifugal fans (for 03 single inlet fans) which may be removed from the sides for
periodic maintenance.
Multi-speed directly coupled electric motors..
To aid the electrical connections and ventilator control, a terminal block with a relay board is fitted.
Stainless steel condensation collecting tray, with condensation drainage towards the lower part
11.2 Accessories
Electrical reheating
SKE
Water coil for reheating
SKW
Regulation damper
SKR
Speed selector
CVU
Apparatus Control Panel
PCU
Pressure operated soiled filter cut-off switch
PSTD
Servomotor for damper regulations
SSE
Anti-freeze thermostat
TEG
